Frequently Asked Questions

Use the formula settings finder which will help you find the setting for the formula you’re using. Click Here for Formula Pro Settings Finder. We have two Formula Pro models so please choose the one that you’re using. If you have any problems, you can contact Baby Brezza Customer Service for assistance.

For a quick reference set up guide, click here for the user manual or click here for the setup video. We recommend following the complete instructions in the user manual.

For a complete list of US Formula Powders and their correct Measuring Inserts or Measuring Wheel Settings, click here. If your powder is not listed, please contact customer service at customerservice@babybrezza.com

The ounce size on the Formula Pro control panel indicates water volume only. When powder is added to the water, the volume is increased, just like when you make a bottle by hand. The final volume of mixed formula is expected to be a little over the ounce amount indicated on the control panel. If the amount of formula is significantly higher than the ounces you are expecting, please contact us.

Clean the Funnel to make sure formula powder isn’t clogging the machine. Contact customer service if the problem persists.

As with any food preparation product or food storage container, proper maintenance and cleaning is required to make sure that your Baby Brezza Formula Pro stays clean. In addition to the regular cleaning recommended in the instruction manual, we recommend that care be taken when pouring formula powder into the powder container. After pouring powder into the container, check to make sure that no powder has spilled in the area next to the water tank, and clean any excess powder with a damp cloth. Also make sure that all parts of the powder container are completely dry before assembly. Mold should not grow in Formula Pro when properly cleaned and dried.

Monthly Descaling Instructions

You can leave the formula powder in the powder tank during the descaling process.

To prevent mineral scale on the water heater inside your Baby Brezza Formula Pro® Advanced, follow these easy steps:

1. Remove the water tank, empty it and fill it with 20oz/600ml distilled vinegar & 20oz/600ml of purified water.

2. Place the water tank on the base of the machine & place a cup larger than 10oz/300ml under the funnel.

3. Select “10oz/300ml” with the “oz/ml” button, then press the “water only” button to dispense.

4. Empty the cup, place back under the funnel, then press the “water only” button again to dispense another 10oz/300ml.

5. Now unplug the machine, remove the water tank, and empty it. Let the machine sit for 4 hours.

6. Wash, rinse and fill the water tank to the max line with purified water, then place it back on the base.

7. Plug in the machine, place a cup to catch 10oz/300ml water and use the “water only” button to run a 10oz/300ml cycle. Dispose of the water dispensed in the cup and then repeat this step to run the entire tank of purified water through the machine. When the “Low Water” indicator turns on, you’re done rinsing.

8. Refill the water tank with purified water and return to normal use

Long Term Storage Instructions

It is extremely important to clean the machine and remove all formula powder residue before storage.

If you’re going to store your Formula Pro® Advanced for later use, or will not use it for a while, please follow the instructions below:

1. Remove the powder container parts, funnel, funnel cover, drip tray and water tank from the base.

2. Wipe the base with a clean damp cloth and make sure to remove any and all formula residue. Dry the base well.

3. Empty the powder container, wash all powder container parts, dry thoroughly, reassemble, & reinstall on the base.

4. Follow the Monthly Descaling Instructions shown above, steps 1-7 only. Do not remove or refill the water tank after step 7.

5. Now place a cup to catch 10oz/300ml water under the funnel, then press & hold the “water only” button for 5 seconds. Water will dispense continuously until the machine is completely empty, then stop automatically.

6. Unplug the machine, remove the funnel, funnel cover and water tank, dry them both thoroughly and reinstall them on the machine.

7. Your machine is now ready for storage. Pack the machine in its box or enclose it in a bag to keep it dust free.

1. Remove powder container from the Formula Pro base and set aside.

2. Make sure the funnel is properly connected to the base of the Formula Pro.

3. Place a container 20oz or larger under the funnel to catch water

4. Fill the formula pro water tank with 10oz of water and 10oz of vinegar

5. Plug in and turn on the Formula Pro.

6. Press and hold “ounce”, “stop” and “start” buttons simultaneously.

7. Continue to hold all 3 buttons until the entire solution of water and vinegar are flushed through the machine.

8. Rinse the water tank and refill with 20oz of purified water and hold “ounce”, “stop” and “start” buttons to rinse any remaining vinegar from the machine”.

9. Unplug the machine, remove the funnel, funnel cover and water tank, dry them thoroughly and reinstall them to the machine.

10. Your machine is now ready for storage. Pack the machine in its box, or enclose it in a bag and keep it dust free.

1. Please hand-wash all components with lukewarm water and mild soap.

2. Make sure all parts are dry and reassemble machine, leaving powder container completely empty.

3. Fill the water tank with 20oz distilled water and run a 10oz cycle.

4. Add a cup of distilled white vinegar inside the water tank with 12oz of water and run another 10oz cycle.

5. Discard remaining vinegar/water solution, and wash tank with mild soap and water, and refill with 20oz distilled water.

6. Run another 10oz cycle to rinse out internal tubes of any vinegar residue.

7. Repeat steps 4-6 if concerns persists.

Yes it’s very important to clean the machine after every 4th bottle or when the clean funnel indicator light turns on. Unfortunately, formula can build up on the funnel during mixing because formula by nature likes to clump with water. If the formula builds up too much, it can affect how much formula drops from the powder container into the mixing funnel, affecting the machine’s accuracy. By removing the funnel after every 4th bottle and wiping the underside of the formula container, you can clean any formula build-up and ensure the machine works accurately. One suggestion to make cleaning easier is to purchase a spare funnel. That way, after every 4th bottle, you can remove the funnel that needs to be cleaned and insert your spare funnel that’s clean. Click here to shop for a spare funnel for the Baby Brezza Formula Pro Advanced and Click Here to shop for a spare funnel for the Formula Pro.

Yes, the Baby Brezza One Step Baby Food Makers are BPA and Phthalate Free.

The bowl and blade are top rack dishwasher safe. The drive shaft should always be removed before washing.

We recommend regular cleaning of the Steam Tank to prevent damage to the machine from mineral deposits. The frequency of cleaning will depend on the type of water you are using and how much mineral deposit build up forms. Always unplug before cleaning. Put 1/3 cup white vinegar and 1/3 cup distilled water in machine and let sit overnight. Pour out vinegar and water solution (refer to user manual for proper emptying instructions). Refill Steam Tank with purified water, plug in machine and run “Steam” cycle for 10 minutes. Let Steam Tank cool and scrub with a cleaning brush if necessary. Rinse with purified water to eliminate any remaining vinegar taste. Empty tank and fill with clean water before cooking

The bowl of The Baby Brezza One Step Baby Food Maker Deluxe holds 3 ½ cups, and the Glass Food Maker holds 4 cups.

We recommend peeling fruits and vegetables for young babies. We recommend checking with your pediatrician before offering any new foods, including fruit and vegetable peels and skins, to your child.

The Baby Brezza Sterilizer-Dryer sterilizes and dries baby products, but it does not wash them. 

Yes, you should always rinse and clean all products before sterilizing to ensure they are properly sterilized.

If you put unwashed bottles with milk residue in the sterilizer, these bottles will not be washed and properly sterilized. Also the milk inside the bottle will drip out and burn the heating plate, resulting in brown staining that is very difficult to clean.  

The Baby Brezza sterilizer boils water to produce steam (212°F / 100°C) to naturally sterilize your baby products. 

We recommend using distilled water to avoid any mineral scale build-up. You can use tap water or spring water, but more frequent cleaning of the heating plate will be required. 

Because the Baby Brezza Sterilizer-Dryer dries contents with each cycle, you will need to add ½ cups or 120ml of water before each use. 

Please do not dishwash any of the sterilizer components. Please clean the lid and accessory tree in hot soapy water. You can use a damp cloth to clean the base and control console. To avoid mineral scale build up, wipe the heating plate with a soft moist cloth after each operation. 

The Baby Brezza Sterilizer-Dryer is 120 volts and comes with a standard North American electric plug. Using the Baby Brezza Sterilizer Dryer with voltage any higher than 120V will permanently damage the unit. We do not recommend using the North American version outside of the US and Canada. Baby Brezza sells appliances globally through a network of distributors. To find a distributor in your country, please contact Baby Brezza Customer Service.

The Baby Brezza Sterilizer-Dryer comes with a 1 year limited warranty. Please click here to read the details in the instruction manual.

Approximately 130°F/55°C

The warmer should not be used without the orange holder.

It is important to fill the warmer with water to the correct level indicated on the warmer. For reference, please see instruction manual here.

Yes, it is important to note that milk storage bags will defrost faster than a glass or plastic bottle. Please reach out to our Customer Service Team if you need assistance. 

The instructions for using the "steady warm" function should be followed when defrosting, and lasts about 10-minutes. When the defrost setting is used, the result is usually room temp milk, depending on the volume being defrosted and the vessel it's stored in. 

Please reach out to our Customer Service Team who will be more than happy to assist if needed. 

The Baby Brezza 2-part bottle is both top-rack dishwasher and electric steam sterilizer safe. The nipples are not microwave sterilizer safe. 

Baby Brezza no longer sells a Bottle Washer. This item was discontinued several years ago… but check babybrezza.com for updates on new bottle cleaning products coming soon.  

Contact customerservice@babybrezza.com and your inquiry will be forwarded to our sales department.

Yes, you can view our warranty here

Baby Brezza’s spare parts are 100% new and perform exactly like the same part that is included with your original purchase. However, if you are purchasing a spare part to help address a specific troubleshooting issue, there’s no assurance that this spare part will resolve the issue.

Shipping costs can be found here.

Please review our return policy here

At this time, we do not offer gift wrapping

Promotional offers cannot be combined with any other offer, coupon or discount. No cash value. No cash back. Not applicable to prior purchases, shipping fees or taxes. *All promotions exclude spare parts, 1-Step Sterilizer, 1-Step Sterilizer/Dryer Advanced  and Formula Pro Advanced WiFi

Unfortunately you can’t due a limitation with our ecommerce provider Shopify. If you’d like to purchase two products that have two different discount codes, please order each in a separate transaction. Sorry for this inconvenience but we’re unable to offer this feature.

Baby Brezza doesn't ship to international addresses. The reasons may include: electrical, regulatory and other requirements which may be different in countries outside the US, therefore the products we sell in the US may not work well internationally.

We are unable to ship products to US mailing addresses with international billing addresses because we have found in our experience that these products are being diverted to other countries, bypassing our rules against shipping internationally.

Our Customer Service team is available to assist you Monday through Friday, 9am to 10pm EST.  The phone number is 888-396-6552.

All emails will be answered as quickly as possible, 3 business days (though usually sooner) cs@babybrezza.com

We recommend calling or emailing us before returning product back to us. Our mailing address is:  Baby Brezza Customer Service, 250 Passaic Street, Newark NJ 07104

The Smart Soothing Mat can be used anytime, anywhere! The mat is easy to use during naps or bedtime, as well as mid-day meltdowns, and is especially good for colicky babies or those suffering from excessive gas.

It’s really easy. First, make sure working batteries are installed properly. You can turn the mat on and cycle through the 8 different settings either using the FREE app or using the buttons on the mat. To turn on using the buttons, just press and hold the on-off button on the mat for 3 seconds. To change settings, press the mode button.

To switch between settings, press the Mode button to cycle through the 8 different settings and find which one works best for your baby:
Extra Low Vibration (mat turns on and starts from Extra Low)
Low Vibration
Medium Vibration
High Vibration
Heartbeat Extra Slow
Heartbeat Slow
Heartbeat Fast

While many parents find that the Smart Soothing Mat works well alone, others may find that their little ones need a combination of techniques, such as:

using in combination with a swaddle blanket or pacifier
using the Mat in a swing
while holding their baby or baby wearing
with additional white or pink noise

Smart Soothing Mat can be folded or rolled for easy transportation to wherever you and baby are going! Most parents use it in their baby’s crib or bassinet either under or over the sheet. But you can also use it in a pack and play, on an activity mat, on the floor, or even in your baby’s car seat (on top of the straps/baby only) or stroller (on top of your baby’s legs). Be sure to follow all safety instructions for the Smart Soothing Mat and any other infant support device you may be using.

Unless your newborn is a preemie (less than 37 weeks), you can start using the Mat with your baby as soon as it is delivered! The product works best for younger babies 0-4 months or during the “4th trimester” as Dr. Harvey Karp calls it. Of course, as babies age, they learn more self-soothing techniques and cry more often for specific reasons (dirty diaper, hungry, teething, etc). Fortunately, the Smart Soothing Mat can still be helpful helping older babies learn to sleep alone in their cribs or while traveling away from home.

All Smart Soothing Mats meet or exceed Children's Product Certificate Standards per the CPSC as well as all other applicable USA and Canadian safety laws based on testing with a third party laboratory. All contact areas are phthalate-free, BPA-free, and lead-free. Common sense safety considerations are included in our labeling and use instructions.

The Smart Soothing Mat’s vibrations and white noise are also safe for baby.  There is currently no clinical data regarding vibrations being harmful to babies and similar vibrating products have been on the market and in use for 10 years or longer without any known ill effects. The Smart Soothing Mat features a range of vibration/sound levels from 40 to 65 decibels. Babies are exposed to decibel levels up to 80-90 decibels in the womb and babies cries can be up to 130 decibel levels, which are higher than the maximum settings on the Smart Soothing Mat.

The Smart Soothing Mat doesn’t contain a heating element so there is no risk of overheating when the product is used properly and according to manufacturer’s guidelines.

Every baby reacts differently. Many find it instantly soothing, calming in just seconds. Some babies, however, may need an adjustment period to get used to the mat. If your baby does not immediately respond or becomes more upset with the mat’s use, it could be they require a different setting (see above for how to change modes) or it could simply be because they’re in pain, hungry, or need a diaper change. In rare cases, we recommend that you try out the mat while holding your baby when he or she is content and happy. For these more sensitive babies, a gradual introduction can help them adjust to the Smart Soothing Mat. Over time, the child associates the product with the comfort of mom and dad’s embrace and is more responsive to the mat's soothing when upset.

The Smart Soothing Mat was designed to be a safe and portable baby-soothing option, not an overnight white noise machine. In addition, the mat adds extra material to cribs so we wouldn’t advise leaving your baby alone with the mat for an extended period of time. If you wish to use the mat to help baby sleep we recommend opting for the 15, 30, 45 or 60-minute shut-off function. After reading all of the instructions and warnings and accepting full responsibility for how you choose to use the product, you are free to make any decision that works best for your child and family.

There is no age or weight limit with the Smart Soothing Mat. In fact, many older children and adults have admitted that they also find the Smart Soothing Mat’s sounds and motions soothing, so don’t be surprised to find yourself curling up with your baby’s vibrating mat someday! The amount of weight on top of the mat may affect the strength of the vibrations or the battery life. With more weight on the mat, the motors have to work a bit harder and thus vibrations may be slightly dampened and battery life reduced.

The way you use your Smart Soothing Mat will affect how long the batteries will last including the vibration level/heartbeat setting you choose and whether you run continuously or use one of the timer settings. The app includes a battery life remaining indicator to help you gauge remaining battery life.

Based on our testing using standard AA batteries and typical use, you should expect at least 30-50 hours of battery life before the batteries start to lose power and the vibration or heartbeat levels diminish. NOTE: if the vibration level immediately stops after turning the mat on, then this is a sign that the batteries need to be immediately changed. We recommend using rechargeable AA batteries to use with your Smart Soothing Mat, especially if you are concerned about how long the batteries will last.

The soft cotton/spandex cover is removable and is machine washable. The water-resistant inner lining can be wiped down with a cloth. Do not submerge any part of the mat in liquids—this could damage the mat’s electronic components.

The Smart Soothing Mat comes with four different vibration levels—extra low, low, medium, and high—and four heartbeat settings – extra slow, slow, medium, fast – to help parents customize the vibrations and white noise to match their baby’s needs and mimic the sounds and motions of the womb that comforted your baby in utero. Some babies only need a little extra soothing so using Extra Low vibrations or heartbeats might work well. Other babies need more soothing power so using High might be best for them.

Yes! There are 4 timer settings with auto shut-off in the app (15, 30, 45 and 60 minutes). Of you can activate the 60 minute auto-shut-off using the buttons. To do this, first turn the mat on by pressing and holding the power button for three seconds, then after the vibrations turn on continue to hold the power button for an additional three seconds to activate the 60-minute auto off.

Yes the Smart Soothing Mat is safe for in a daycare setting. First, the Smart Soothing Mat has been tested by a third party laboratory in the U.S. We have carefully sought out, tested, and selected only phthalate-free, BPA-free, and lead-free components including all components encased in the waterproof barrier. Common sense safety considerations are included in our labeling and use instructions.

Second, the Smart Soothing  Mat’s vibration and white noise levels are safe for babies. There is currently no clinical data regarding vibrations being harmful to babies and similar vibrating products have been on the market and in use for 10 years or longer without any known ill effects. The Smart Soothing Mat features a range of vibration/sound levels from 40 to 63 decibels. Babies are exposed to decibel levels up to 80-90 decibels in the womb which is significantly higher than the maximum setting on the Smart Soothing Mat.

If your daycare facility follows the Hospital Standard for white noise machines (which is 50 decibels), you can use the Smart Soothing Mat on the Low and Medium vibration levels since these decibel levels are below 50. The Medium High and High vibration levels have decibel levels between 55-62, respectively, and the low and high heartbeat settings have decibel levels between average 55-60 and 60-63, respectively.

Lastly, the Smart Soothing Mat also doesn’t contain any heating element so there is no risk of a baby overheating when the product is used properly and according to manufacture guidelines.

Baby Soothe is the first-ever baby massager that naturally calms your baby by mimicking mom’s gentle fingertip massage. It has 3 massagers that gentle rotate which activates your baby’s natural calming response. To learn more about how Baby Soothe works, click on: https://www.youtube.com/watch?v=xFtFZuJod4Q

Yes, the Baby Soothe is safe to use on your baby. Massage has been used on babies for centuries and is a natural way to calm a baby. The Baby Soothe massager meets or exceeds all applicable USA and Canadian safety laws. All contact areas are phthalate-free, BPA-free, and lead-free. Common sense safety considerations are included in our labeling and use instructions.

It’s really easy to use Baby Soothe. To turn on, just press the large button. To turn off, just press the large button. The Baby Soothe comes with an automatic 10 minute shut-off.

The Baby Soothe comes with an automatic 10 minute shut-off.

You can use the Baby Soothe in two different ways. You can use the massager directly on your baby. Or you can wrap the belly band around your baby using the Velcro flaps and then place the Baby Soothe in the large pocket on the front. Either way, the Baby Soothe will work and naturally calm your baby.

Baby Soothe was designed to be safely used on your baby either with or without adult supervision. Baby Brezza recommends using Baby Soothe with adult supervision.

Based on our testing, the batteries should last at least approximately 50 hours of continuous use. Note the Baby Soothe comes with an automatic 10 minute shut-off so one set of batteries should last for months. If you’re concerned about battery life, we recommend using rechargeable batteries.

The Baby Soothe massager with batteries and the belly band weigh 10 ounces.

It’s easy to care of the Baby Soothe massager and band. To clean the massager, wipe it with a soft, damp cloth. Do not immerse in liquid. NOTE: if water accidentally gets inside the massager, remove the batteries, allow the unit to dry completely, then wipe with a dry cloth before next use. To clean the band, you can either hand or machine wash using cold water. Air dry only. Do not dry clean, bleach or tumble dry the band.

Baby Soothe comes with a 1 year limited warranty.